Bobcat & Steiner AirFX Finish Mower Deck attachments Recall

Published by Reclia Safety Desk | July 23, 2026

Recall Information Record – Reclia Database

Recall Summary
On February 6, 2025, Doosan Bobcat North America, of West Fargo, North Dakota, initiated a recall of Bobcat and Steiner AirFX Finish Mower Deck attachments. The recall was published by the U.S. Consumer Product Safety Commission (CPSC) under Recall Number 25121. The recall involves approximately 552 units in the United States and an additional 27 units sold in Canada. The firm is aware of five incidents where the locking pins were unable to be installed to secure the deck in the upright or tilted position. No injuries have been reported.

Affected Products
The recalled products are Bobcat and Steiner AirFX Finish Mower Deck attachments. The mower decks are all black and labeled with “AirFX” and either “72” or “61” depending on the mower deck model. The following model numbers, located on the rear of the attachment on the right-side frame rail, are included in this recall:
– Model Number 7526575: 72” AirFX
– Model Number 7526579: 61” AirFX
– Model Number 7449223: 61” AirFx Finish Mower
– Model Number 7447341: 72” AirFx Finish Mower

The attachments were sold at Bobcat and Steiner dealers nationwide from April 2023 through September 2024 for between $5,200 and $5,500. The manufacturer is Doosan Bobcat North America, located in West Fargo, North Dakota. The products were manufactured in the United States.

Hazard Information
The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service. This condition poses a crush hazard. The firm is aware of five incidents where the locking pins were unable to be installed to secure the deck in the upright or tilted position. No injuries have been reported.

Consumer Action Required
Consumers should immediately inspect and determine whether locking pins can be inserted while the deck is in the upright or tilted position during maintenance or service. If the locking pins cannot be inserted, consumers should obtain two straps, each rated for 1,500 lbs., and wrap a strap around each front tractor axle, securing each strap to the mower deck when performing service or maintenance. Consumers should contact Doosan Bobcat North America if they are unable to obtain straps, and straps will be provided at no cost to the consumer. Doosan Bobcat North America is contacting all known purchasers.

Official Remedy
Consumers should contact Doosan Bobcat North America or a Bobcat dealer to obtain a free repair, which will be available in the near future. Until the repair is available, consumers must follow the interim strap instructions described above. The remedy options listed in the recall notice are: Inspect, New Instructions, and Repair.

Contact Information
Consumers may contact Doosan Bobcat North America at 800-743-4340 from 9 a.m. to 5 p.m. CT, Monday through Friday, or online at www.bobcat.com/na/en/parts-service/service/recalls or www.bobcat.com and click on “Recalls” at the bottom of the page for more information. Additional information is available from Health Canada at the following URL: https://recalls-rappels.canada.ca/en/alert-recall/bobcat-steiner-airfx-finish-mower-deck-attachment-recalled-due-injury-hazard.

Frequently Asked Questions