Evaporator coil drain pans Recall

Published by Reclia Safety Desk | July 19, 2026

Recall Information Record – Reclia Database

Recall Summary
This is an expansion of a previous recall of evaporator coil drain pans manufactured by Daikin Comfort Technologies Manufacturing L.P. (formerly Goodman Manufacturing Company L.P.). The recall was originally announced in November 2021 and reannounced in July 2022. This expansion adds approximately 3,600 additional units (plus about 12 units sold in Canada) to the recall. The total number of units previously recalled was 298,300 evaporator coil drain pans in the United States and 44,000 in Canada. The recall expansion includes certain units manufactured between January 2019 and February 2020 that were incorrectly marked with a 2018 serial number. The recall date is January 11, 2024.

Affected Products
The affected products are evaporator coil drain pans installed in specific gas furnace configurations. The recall expansion includes units with the following configurations and coil serial numbers:
– Condensing furnace system, Up-Flow configuration (coil above furnace): All prefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812. Units sold from January 2019 through November 2021.
– Non-condensing furnace system (certain configurations), Up-Flow configuration (coil above furnace): Any “competitor” brand (excludes Goodman, Daikin, or Amana branded furnaces). Prefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812. Units sold from January 2019 through November 2021.
– Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included.

Affected units can be identified by serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the “Energy Guide” label on the furnace. The model number of the outdoor condenser may also be required and can be found on a label attached to the product. Whether a non-condensing furnace system falls within the scope of the recall depends on the location of the burners, which can be verified through DCT’s model verification tool at https://www.recallrtr.com/drainpan.

The products were sold by heating and cooling equipment independent dealers nationwide from January 2019 through November 2021 for between $200 and $1,200 per unit. Consumers may have purchased a bundled product including the coil, furnace, installation, and ancillary parts and supplies, or may have purchased the evaporator coil drain pan separately as a replacement product.

Hazard Information
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt, and deform, posing a fire hazard. DCT has received a total of 31 reports of fire involving the drain pans, including five reports since the recall was reannounced in July 2022. The incidents resulted in one reported smoke inhalation and several reports of significant fire and smoke damage to residences.

Consumer Action Required
Consumers should contact Daikin Comfort Technologies Manufacturing L.P. (DCT) to determine whether their unit is included in this recall and to register for the free repair by a qualified technician. DCT is contacting all registered consumers where records indicate their gas furnace system is subject to the recall. Consumers can also use the model verification tool at https://www.recallrtr.com/drainpan to check if their unit is affected.

Official Remedy
The official remedy is a free repair by a qualified technician. Consumers must contact DCT to register for this service.

Contact Information
DCT toll-free at 888-520-0579 from 7 a.m. to 6 p.m. CT Monday through Friday, or online at www.recallrtr.com/drainpan or www.goodmanmfg.com and click on “PRODUCT RECALL” for more information.

Frequently Asked Questions