2021 AUDI S8 Recalls

Published by Reclia Safety Desk | June 25, 2026

Here is a factual vehicle recall information record for the 2021 Audi S8, based on the provided NHTSA data.

Reclia Consumer Safety Database – Vehicle Recall Record

Vehicle: 2021 Audi S8
Manufacturer: Volkswagen Group of America, Inc.
Database Entry Date: [Current Date]

Recall Summary

The 2021 Audi S8 has been subject to eight distinct recall campaigns issued by the National Highway Traffic Safety Administration (NHTSA) between 2021 and 2025. These recalls address a range of safety defects, including software errors affecting the rearview camera and instrument panel, mechanical issues with the rear axle and seat belts, and potential engine control module failure. The most common issue involves the rearview camera system, which has been the subject of three separate recalls due to software errors that can prevent the image from displaying when the vehicle is shifted into reverse. This condition violates Federal Motor Vehicle Safety Standard (FMVSS) No. 111, “Rear Visibility.” Other significant recalls involve a missing sealing pin that can allow moisture into the engine control module, potentially causing an engine stall, and a stress corrosion issue with the rear axle lock nut that could lead to a loss of vehicle control.

Affected Vehicle

This record applies exclusively to the 2021 Audi S8 sedan. While many of the recalls listed below also affect other Audi models (such as the A4, A6, A7, A8, Q5, Q7, Q8, and various RS and S variants), this summary is limited to the 2021 model year S8. Owners should verify their specific vehicle’s involvement using their 17-character Vehicle Identification Number (VIN) on the NHTSA website or by contacting an Audi dealer.

Recalled Components

The following eight NHTSA campaigns have been issued for the 2021 Audi S8. Each campaign has a unique number and addresses a specific component or system.

1. NHTSA 21V111000 (Engine Control Module): A missing sealing pin on the engine control module (ECM) connector may allow moisture to enter, causing a malfunction that could lead to an engine stall without warning, increasing the risk of a crash.
2. NHTSA 21V295000 (Rear Axle Assembly): The lock nut on the trailing arm of the rear axle may break due to stress corrosion. This can misalign the rear axle, potentially causing a loss of vehicle control.
3. NHTSA 21V606000 (Rear Seat Belt Retractor): The automatic locking retractors for the rear seat belts may deactivate prematurely. This can prevent a child restraint system from being secured properly, increasing the risk of injury in a crash. This violates FMVSS No. 208, “Occupant Crash Protection.”
4. NHTSA 21V825000 (Rearview Camera – Software): A software error may prevent the rearview image from displaying when the vehicle begins to reverse. This reduces the driver’s rear view and violates FMVSS No. 111.
5. NHTSA 22V034000 (Tires – Alignment): After a previous repair for recall 21V295, the rear axle alignment may not have been inspected. Misalignment can cause premature or uneven tire wear, increasing the risk of a crash.
6. NHTSA 22V742000 (Rearview Camera – Display Function): A separate software issue may cause a blank or black screen instead of the rearview camera image when the vehicle is placed in reverse. This also violates FMVSS No. 111.
7. NHTSA 25V201000 (Instrument Panel): A software error in the instrument cluster may cause the display to fail. This could prevent the driver from seeing critical safety information, such as the speedometer or warning lights.
8. NHTSA 25V900000 (Rearview Camera – Software): A third software error may prevent the rearview camera image from displaying as intended, again violating FMVSS No. 111.

What Owners Should Do

Owners of a 2021 Audi S8 should take the following steps to ensure their vehicle is safe and compliant with all recalls.

– Check Your VIN: The most important step is to determine if your specific vehicle is affected by any of these recalls. Visit the official NHTSA website (www.nhtsa.gov/recalls) and enter your 17-character VIN. This will show all open and completed recalls for your car.
– Contact an Audi Dealer: If any recalls are open, schedule an appointment with an authorized Audi dealer. All repairs for these campaigns are provided free of charge. The dealer will perform the necessary software updates, inspections, and

Frequently Asked Questions