Lutron-branded power interfaces for LED tape lights Recall

by

Published by Reclia Safety Desk | July 22, 2026

📌 Recall Notice

Product: Lutron-branded power interfaces for LED tape lights

Brand: Lutron-branded

Hazards: Electric Shock Hazard

What to do: Stop using this product. Follow the recall instructions for refund or replacement.

Official US CPSC Recall Notice
Recall #10297 |
View original notice →

Recall Summary

Product Lutron-branded power interfaces for LED tape lights
Brand Lutron-branded
Category Electronics
Recall Number 10297
Hazard Electric Shock Hazard
Units Affected Not specified
Recall Date June 05, 2025
Remedy Contact manufacturer
Country 🇺🇸 United States

Recall Summary

This recall involves Lutron-branded power interfaces, model LU-PH3-B, intended for use with LED tape lights. The recall was published on June 5, 2025, by the U.S. Consumer Product Safety Commission (CPSC) under Recall Number 25317. The 96W hard-wired power interfaces were distributed alone and as part of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN). The recall is also listed on the Health Canada recall database. No injuries have been reported in connection with this recall.

Affected Products

The recalled product is the Lutron-branded power interface for LED tape lights, model LU-PH3-B. Approximately 1,944 units are affected in the United States. The power interfaces were sold alone and as components of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN). The products were sold by dealers and distributors of audiovisual (AV) equipment and electrical supplies nationwide from September 2024 through April 2025. The power interfaces were sold for about $300. The Lumaris LED tape light starter kits and the HomeWorks systems were sold for between $1,250 and $1,400. The products were manufactured in China. The distributor is Lutron Electronics Co. Inc., of Coopersburg, Pennsylvania.

Hazard Information

The power interface can fail during a significant power surge (e.g., lightning strike), posing a shock hazard to consumers if they touch the LED tape lights. No injuries have been reported as of the recall publication date.

Consumer Action Required

Consumers should immediately stop using the recalled power interfaces and any connected lighting and turn off the power at the circuit breaker. Consumers should contact Lutron for instructions on how to receive their free replacement power interface and how it will be installed at no charge. Consumers should go to https://residential.lutron.com/us/en/safety/safety-recall to determine if their unit is included in this recall and, if so, to register to receive installation of the replacement power interface. If a unit is included, Lutron will provide the free replacement power interface and a pre-paid mailing label that the consumer can use to return the unit to Lutron.

Official Remedy

The official remedy is a free replacement power interface, installed at no charge. Consumers must contact Lutron to register for the replacement and installation. Lutron will provide a pre-paid mailing label for the return of the recalled unit.

Contact Information

Consumers may contact Lutron toll-free at 800-239-0495 from 8 a.m. to 5:30 p.m. ET Monday through Friday. Consumers may also email Lutron at productrecall@lutron.com. Additional information is available online at https://residential.lutron.com/us/en/safety/safety-recall or at https://www.lutron.com/us/en by clicking on “Safety Notices” at the bottom of the page.

Recall Timeline

  • **June 05, 2025** – Recall announced by CPSC (Source)
  • **Current** – Consumers advised to stop using product
  • **Ongoing** – Refund or replacement available

Frequently Asked Questions

Q: How do I identify the recalled Lutron-branded power interfaces for LED tape lights?

A: Check the model and serial number on your product against the official recall notice (#10297).

Q: What should I do if I own the recalled Lutron-branded power interfaces for LED tape lights?

A: The recall notice advises consumers to stop using the product and follow the recall instructions.

Q: How do I get a refund or replacement for the recalled Lutron-branded power interfaces for LED tape lights?

A: Contact the manufacturer using the information in the recall notice.

Related Recalls (Click to expand)

Disclaimer: Information on this page is summarized from official recall notices.
Reclia is a recall information database and does not conduct product testing, safety certification,
or independent investigations.

Consumers should refer to the original recall notice
for complete details and official instructions.




Leave a Comment